Smooth Re-landing UV/Curve Pin

After version 4.5, our agent can work with UV/Curve Pin and CCT more smooth.

In the older version of Miarmy, once CCT-enabled agent pin to the surface or curve, it stick onto it. When someone stack on others by CCT control, and then when it come down to the surface/curve, it cannot land smoothly. There always some sudden change on that, it cause unnatual result.

^{frame 1, 2, 3 the movement of agent blue, from 2 to 3, it sudden from top to ground}

Our new system can make the CCT enabled agents re-landing on the surface/curve smoothly, like below image shown. It will be more natual and without jumping problematic result.

_{smooth re-landing onto pin surface/curve.}